Maximum efficiency for large open spaces.

easyTWIN Steel — your modular two-post PV mounting system for open spaces

Today's ground-mounted PV systems are becoming ever larger — 4 to 6 modules side by side or 2 to 3 modules on top of each other are not uncommon in order to reduce system costs. We have developed easyTWIN Steel for exactly these requirements: The new Two-post outdoor mounting system impresses with low system costs and offers a wide range of variants, including special versions for bifacial modules. This steel solar mounting system is modularly constructed and can be flexibly adapted to different project sizes — Can be planned from 3 MW for your next solar park. Regardless of whether you work as a solar engineer, EPC or wholesaler — easyTWIN Steel makes it easier for you to set up outdoor PV systems through quick installation, high flexibility and sustainable materials.

Quick installation: outdoor PV installation made easy

easyTWIN Steel saves you valuable time during installation. Die innovative module clamps of our system, you can Tighten upside down comfortably from below — this makes installation on the open space significantly faster and more ergonomic. All components are precisely coordinated, which minimizes errors during assembly. This is how it works outdoor PV construction almost in record time and you can start the actual installation of the solar panels more quickly.

Flexible module arrangements for every application

Thanks to its sophisticated design, easyTWIN Steel offers maximum Flexibility in module configuration. You can choose per table 4 to 6 modules horizontal mount (side by side in landscape mode) or 2 to 3 vertical modules Fasten (one above the other in portrait mode) — according to the requirements of your project. Different inclination angles of 20° to 30° are available to optimally adapt the yield to location and latitude. The module fields can be arranged as tightly as possible so that you use the available space efficiently. Special formats or uneven terrain conditions are also no problem: As modular PV mounting system for open spaces easyTWIN Steel can be planned and scaled on a project-specific basis. The statics (e.g. post spacing) are calculated individually according to wind and snow load zones, so that even large outdoor systems can be set up reliably and safely.

Variants for bifacial modules — more yield for bifacial PV systems

You're planning a bifacial PV system? easyTWIN Steel offers special variants that ideal for bifacial solar modules were developed. The construction minimizes shading on the back of the module: support profiles and struts are positioned so that they are directly below the cell division lines or module connections and therefore barely cast any shadow on the back. At the same time, the spacing of the carrier profiles is selected so that the underside of bifacial modules is exposed to maximum light from floor reflections or diffuse light. The result: your bifacial modules can exploit their full potential and achieve a higher daily energy yield. Of course, the system is also for glass-glass modules suitable and has been statically tested as a complete set to ensure safe operation in the long term.

Durable “green” steel with Magnelis coating

easyTWIN Steel is made of high-quality, black steel (S320—S450), the one with Magnelis coated — an advanced metallic coating of zinc, aluminum and magnesium. This Magnelis coating provides a excellent corrosion protection and contributes to the sustainability of the system. A particular advantage of Magnelis is its Self-healing ability on cut edges: If the surface on an edge is damaged, a protective film is formed which protects the area from environmental influences. This is how Magnelis achieves a up to ten times higher resistance against corrosion than conventional zinc coatings. In addition, Magnelis is expressly approved for use in aggressive environments (e.g. coastal areas, C5 marine class), which makes our Photovoltaic steel frame underlines. For you, that means: long-lasting protection and less maintenance — The Magnelis coating has a warranty of up to 25 years in solar applications, and repairs or regular re-galvanizing are virtually superfluous. This green steel Thanks to the thinner coating, it also protects the environment (less material consumption and lower zinc release) and enables a sustainable PV substructurethat lasts for decades.

Flexible foundations: piling post or concrete foundation

Not every terrain is the same — that's why easyTWIN Steel offers you three floor mounting options. On suitable surfaces, the support posts are used as Ramming post directly into the ground, which enables quick, cost-effective installation without major earthwork. Binding depths of around 1.5 m are usual, depending on static requirements. If ramming is not possible or only partially possible due to hard soil conditions or sensitive surfaces (for example on landfills, rocks or sealed surfaces), the system can alternatively be used with the anchor system or on concrete foundations be assembled. In the former case, the ram posts are driven flat into the ground and then steel rails are driven diagonally into the ground. In the latter case, the steel supports are bolted onto pre-cast concrete blocks or point foundations. All variants — rammed posts with or without anchor system, as well as the concrete foundation — give the construction high stability and durability. You therefore have the freedom to adapt easyTWIN Steel to local conditions. Even with difficult soils or high wind loads, your system is always securely and firmly anchored.

Ideal for large projects — individual planning starting at 3 MW

easyTWIN Steel shows its strengths particularly in larger PV projects. Already Starting at 3 MW system size Your project can be planned individually, including optimization of the layout for the location. Our experienced designers take into account the terrain profile, geotechnical reports and regional wind and snow load requirements to perfectly design the two-post structure. The result is a tailor-made assembly system that provides a economical installation from the first row of modules enables. Thanks to its modularity and scalability, easyTWIN Steel allows both medium-sized open-space systems and huge solar parks with Hundreds of thousands of modules be realized. So this system is ideal for large projects in Germany, Austria and throughout Europe, where reliability and low construction costs are paramount.

Would you like to buy a PV substructure that combines all of these benefits? With easyTWIN Steel, you get a steel photovoltaic frame, which offers quick installation, flexible applications and long-lasting corrosion protection in one system. Convince yourself of our ALUMERO easyTWIN Steel — the modular two-post mounting system that you can fully rely on for your outdoor PV projects.